Tag Archives: C-band
40dBm 10W High Power Erbium-doped PM Fiber Amplifier
The one in the video is a benchtop 40dBm erbium-doped fiber amplifier. The input and output fibers of the PM amplifier are polarization maintaining fiber PM1550 and the connector keys are aligned the slow axis.
This EDFA is designed to amplify optical signals up to 10W average power for high power applications at 1550nm wavelength range. It supports two working modes: ACC and APC. The two working modes of ACC and APC can be switched. In APC mode, the output power can be adjusted. In ACC mode, the operating current can be adjusted.
The operating current or output power can be adjusted by pressing the button. You can choose the software control function and use the RS232 interface to connect to the software.
The test report of this EDFA.
30dBm EDFA Single-mode Fiber Laser Module
This is a C-Band 30dBm module type EDFA. It is equipped with SMF-28e single-mode fiber, and polarization-maintaining fiber can also be customized. This is a high-power EDFA, with a row of aluminum sheets on one side of the shell for easy heat dissipation. This is a modular design, and desktop EDFA can also be customized. Let’s check it now.
High power erbium doped fiber amplifier (EYDFA-HP-BA)，based on amplification technology of double clad erbium doped fiber， unique optical packaging technology, and with reliable hardware light path protection design, realized high power laser output in C band or L band， It has the advantages of high gain and low noise, and can be widely used in CATV, optical fiber communication, laser radar, etc..
The test report & spectrum analysis chart of C-Band 30dBm SM EDFA.
The relationship between power current and output power.
