Tag Archives: fiber laser source
405nm SM Fiber Laser Controlled by Button Operational Demo
This is a video about a desktop laser with button control of the laser output. we demonstrate with a 405nm 20mW SM fiber laser. It is controlled by buttons by default, and it can also be controlled by software. The laser is equipped with single-mode fiber output, and polarization-maintaining fiber output can also be customized. It has LCD display, real-time display of current power. The power is adjustable, and the adjustment accuracy is 0.1mW. Let’s check it now.
Adjust the laser output power：
Press the middle square button to enter setup mode.
The left and right arrow buttons are used to select the digital position to be adjusted.
The up and down arrow buttons are used to adjust the size of the numbers.
Finally press the middle square button to save and exit the settings.
When the key is turned ON, the Active indicator lights up, indicating that there is laser output.
This laser adopts semiconductor laser chip, and the professionally designed drive and temperature control circuit temperature control ensures the safe operation of the laser, stable output power and spectrum, and excellent spot quality (TEM00 mode).
The test data report and optical spectrum of 405nm fiber laser source.
1030nm 30dBm 1W SM Fiber Laser Source Benchtop
This laser adopts all-fiber laser technology, professionally designed and driven temperature control circuit and control to ensure the safe operation of the laser and stable laser output power and spectrum. It is suitable as a seed laser for higher power laser systems, and can also be used for production testing of optical fiber devices. It can be provided in benchtop or modular packaging.
It is a single-mode fiber copuled laser at 1030nm 1000mW. The laser output power is adjustable from 100mW~1000mW, and the adjustment accuracy is 1mW. It can be adjusted by buttons. Customizable software control function, connect with computer via RS232-USB. Configured with single-mode fiber Hi1060, and can also customize polarization-maintaining fiber output.
1030nm is invisible light, we use infrared photosensitive film to observe the light spot.
The Test Data Sheet & Spectrum at 1030nm, spectral bandwidth <0.2nm.
300mW 2200nm Infrared Fiber Optic Lab Laser System
The 2200nm multimode fiber-coupled laser is fiber-coupled with a 2200nm semiconductor laser to obtain fiber output. The coupled fiber output laser power stability is good, the spot pattern can be improved, and the collimated beam can meet the demand for high beam requirements.
It is a 2200nm 300mW laser system with 400μm fiber. The optical fiber is pluggable, and it’s interface can be customized according to customer needs. It supports two working modes: CW and Modulation. The laser output power is adjustable by rotating the silver-white rotary button. The middle display shows the magnitude of the current. The higher the current, the higher the output laser power.
The test report for the 2200nm laser.
1550nm Nanosecond Pulse Fiber Ultra-fast Laser Module
This is 1550nm nanosecond laser module with DC 5V power adapter. Single-mode fiber output, peak power is 10W. It can output synchronous electrical signal. The built-in trigger is used by default, and the signal frequency and signal pulse width are set by software.
This nanosecond laser is controlled by software. Three parameters of current, repetition frequency and pulse width can be set. The maximum repetition rate is 100kHz. The maximum pulse width is 30 nanoseconds.
Simply check whether the laser is outputting normally, the 1550nm infrared laser spot can be seen on the infrared photosensitive film, and the laser is working normally.
This is a test data report for the nanosecond laser module.
1310nm 20mW PM Fiber DFB Laser Source Benchtop
This is a 1310nm 20mW infrared laser coupled optical fiber. The fiber is PM1310 polarization-maintaining fiber, and SMF-28e single-mode fiber can also be customized. In addition, the single-mode fiber coupling interface is a consumable part, we make it into a fixed state and cannot be plugged or unplugged. The power of the laser output can be adjusted by the button, and the adjustment accuracy is 0.1mW. The back of the laser has an RS232 interface, and software control mode can be added.
1310nm single-wavelength laser light source uses DFB semiconductor laser chip, polarization-maintaining fiber output, professionally designed drive circuit and TEC control to ensure the safe and stable operation of the laser.
The test data for a 1310nm laser.
The spectra of the 1310nm laser at 1mW and 20mW respectively.
The test data for a 1310nm laser.
The spectra of the 1310nm laser at 1mW and 20mW respectively.
ASE Broadband Light Source with Two Fiber Outputs
This is a custom ASE broadband light source with built-in circulator. Unlike the standard ASE, this custom ASE has 2 fiber outputs. The two output fibers are the 2nd and 3rd fibers of the circulator. Let’s check it now.
The fiber ASE broadband light source is an incoherent light source, which is the spontaneous radiation generated by the semiconductor laser pumping erbium-doped silica fiber, and the spectral flattening technology is introduced to achieve a broadband flat spectrum. The wavelength of the light source covers the C-band, and the spectral flatness is better than 2dB. It is output through single-mode fiber or polarization-maintaining fiber, which is suitable for applications such as fiber sensing.
CivilLaser can customize various ASE light sources according to customer needs. The wavelength range of C-Band, L-Band, C+L band is optional. Fibers are available in SM and PM. It can be customized whether to add a circulator. The output power can be customized as adjustable power. Software control function can be added. General models are listed on the web page, if you need special customization, please contact us.
