Ytterbium-doped Fiber Amplifier PM Fiber Laser Source Benchtop

August 24, 2022 Civil Laser

The following is a demonstration of the operation of the desktop YDFA button control. Let’s check it now.

This is a Ytterbium Doped Fiber Amplifier with PM Fiber. The working wavelength is 1030nm~1070nm. It supports ACC and APC working modes. We can switch the APC/ACC working mode with the left and right buttons. At the same time, this machine also supports power regulation. In the APC working mode, press the up and down arrow buttons to adjust the power.

Ytterbium-doped fiber amplifier (YDFA) generates gain by pumping ytterbium-doped fiber with a semiconductor laser, and is used to amplify laser signals in the 1030~1100nm band. PM980 polarization-maintaining fiber output, the output power is continuously adjustable, and has the advantages of high gain and low noise. The desktop YDFA is convenient for experimental operation, and the user can adjust the pump current and output power through the buttons on the front panel. A more compact modular YDFA is also available, which is convenient for users’ system integration. Both desktop YDFA and modular YDFA can support PC software control and serial port command control.

The test report of 27dBm 500mW YDFA.

1030nm 1070nm, fiber amplifier, fiber coupled laser, PM fiber, YDFA, ytterbium-doped

- Recent Posts
- Comments
- 385nm 180mW Lab Laser System Operation Video
  
  1:36 AM By MeiLing Chen
  385nm semiconductor lasers are based on the photoelectric effect of semiconductor materials. They use electrical excitation to make electrons in semiconductors transition and release light energy, Read More »
- 40000mW Strong Laser Beam 520nm Green Lab Laser System
  
  6:07 AM By MeiLing Chen
  As an important part of modern science and technology, fiber-coupled lasers play a key role in many fields with their high efficiency, stability and flexibility. Among Read More »
- 430nm 1W Semiconductor Laser Operation Video
  
  2:37 AM By MeiLing Chen
  Semiconductor lasers, also known as laser diodes, are lasers that use semiconductor materials as working materials to produce stimulated emission. Among the many semiconductor lasers, 430nm Read More »
- FLH-1064-40-SM-B 1064nm 10W Fiber Laser Operation Video
  
  2:33 AM By MeiLing Chen
  This is a 1064nm 10W single-mode fiber laser. There are 2 fiber output interfaces. The ‘OUTPUT’ on the left is the actual laser output. The ‘MONITOR’ Read More »
- 1528~1603nm 100mW ASE Broadband SM Fiber Light Source
  
  6:10 AM By MeiLing Chen
  The fiber ASE broadband light source is an incoherent light source, which is the spontaneous radiation generated by the semiconductor laser pumping erbium-doped silica fiber, and Read More »